• High Quality Desander, Solid Control Equipment Desander ...

    Desander is the second equipment in solids control system,it is used to separate solid phase particles whose diameter is 40~75μm. (1)Select Special wear-resistant polyurethane material hydrocyclones. (2)Inlet tangential feeding,smooth transition ,which help to improve separation efficiency and have a wide range of separation sizes.

    Lee Más

  • Desander Mud Cleaner, Desander Mud Cleaner Suppliers and ...

    drilling mud cleaner are combined from Desander , Desilter and an Underflow Screen, at the same time Mud cleaner has the higher cleaning function compared with separated desander and desilter. Mud cleaner is the ideal device of the second class and the third class solid control to treat the drilling mud.

    Lee Más

  • Floorhand at Parker Drilling Career Site

    Feb 06, 2020· Assists with repairs and maintenance of large mud pumps, shale shaker, desander, desilter, and degasser units. Responsible for moving joints of casing to the catwalk during casing job. Assists with attaching casing to pick-up lines so casing can be lifted to the rig floor.

    Lee Más

  • desander | Mud treatment introduction

    Desilter is a third separation equipment of solid control system, which also can be used in building construction fields. Recent days, DC Machinery shipped 6 sets desilter to foreign clients used in building construction fields. Usually the cone diameter is less than 6″is called Desilter. We commonly used 5 “and 4″ cone to separate solid ...

    Lee Más

  • Bored Pile &TBM Desander Unit - HDD&CBD - GN Solids Control

    We have series product for our standardized desander unit, the D series is economy configuration, and the G series is high configuration. The D series desander unit is available for mud recycling function, but without the storage and mud mixing function .It needs to match mud storage and mud mixing devices to make a complete system.

    Lee Más

  • desander | Solids Control

    Desander and desilter is widely used in mud cleaning system. Following the progress of the time and high requirements of users. The desander and desilter all make greats progress. But recent days, DC Solid control company got an order of 6 sets old-fashioned desander and desilter used for HDD industry.

    Lee Más

  • Desander(id:9623636) Product details - View Desander from ...

    Desander and desilter are solid control equipment with a set of hydrocyclones that separate sand and silt from the drilling fluids in drilling rigs. Desanders are installed on top of the mud tank following the shale shaker and the degasser, but before the desilter.Desander removes the abrasive solids from the drilling fluids which cannot be removed by shakers.

    Lee Más

  • Desander - Wikipedia

    A desander with a (10 inches (250 mm) cone) is able to remove 50% of solids within the 40-50 μm (micrometre) range at a flow rate of 500 US gallons per minute (32 L/s), whilea desilter (4 inches (100 mm) Cone) is able to remove 50% of solids within the 15 …

    Lee Más

  • desander,D-SANDER,Desander Systems - Shale shakers

    KOSUN drilling mud desander is used as the 2nd stage of drilling solids control system, for which the solids diameter to separate ranges from 45 to 75 microns.. Desander Features & Benefits: 1. Polyurethane used as the material of desander cones to extend …

    Lee Más

  • desander - Schlumberger Oilfield Glossary

    The cleaner and lighter density liquid mud travels up through a vortex in the center of the hydrocyclone, exits through piping at the top of the hydrocyclone and is then routed to the mud tanks and the next mud-cleaning device, usually a desilter. Various size desander and desilter cones are functionally identical, with the size of the cone ...

    Lee Más

  • DESANDER

    Unique series desander is the second phase solid control equipments in well drilling, the general cones are 8", 10" & 12" . Unique cone adopted Polyurethane or abrasion-resistant Alloy material, it is the ideal products to match desander and desilter.

    Lee Más

  • Solids Control Equipment,Solids Control Job,Drilling Rig ...

    KOSUN is a professional of solids control job and equipment in China. Solids control equipment,drilling rig and components, drilling waste management and camp room and tank are new kinds of equipment researched and developed by KOSUN.If you want to buy solids control equipment,welcome to email:[email protected]

    Lee Más

  • Desilter | GN API Shaker Screen

    2) 3 panel mud cleaner with desander cones and desilter cones. The desander cones and desilter cones can separate the solids in 2 steps per the diameter. And after this unit, the drilling mud can go to mixing tank for chemical mixing and adjustment for reuse. END.

    Lee Más

  • Drilling mud centrifugal pump work » GN Desander Desilter

    GN Hydrocyclone desander desilter for drilling mud solids control,10 inch desander cones,4 inch desilter cones are popular used in drilling fluids system for oil gas drilling,and HDD(Horizontal directional drilling).GN also manufacture shale shakers,centrifuges,complete equipments for mud tank system-GN Desander Desilter.

    Lee Más

  • Brightway Solids-3 - Ennox Technology AS

    Hydrocyclone is the important products to match desander and desilter. Brightway Hydrocyclone adopted Polyurethane. Other spare parts. Solids Control Equipment Parts: Shale Shaker Parts, component, accessory. Oil Drilling Fluids Treatment System.

    Lee Más

  • DC Solid control - Mud recycling system / solids control ...

    To be as a professional manufacturer of drilling mud cleaning system. DC Solid control can provide all kinds capacity mud cleaner and related equipment, such as shale shaker, desander, desilter, centrifuge, centrifugal pumps, mud agitator and ect. If you have anyother requirements please feel …

    Lee Más

  • Desander and Desilter for Drilling Mud System

    Desander removes the abrasive solids from drilling mud which cannot be removed by shale shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter. 2. Desander and desilter will be replaced by shale shaker with fine mesh screen. There are some disadvantages for desander and desilter. Because ...

    Lee Más

  • Drilling Mud Cleaner, Mi-Swaco Replacement, Desander and ...

    Mud cleaner mi-swaco replacement for sale now 1. Polyurethane ( PU ) material, high-chromium cast iron or ceramic to make desander and desilter cones. 2. Desander cones can be installed between one and three 10" desander cones, each cone can process …

    Lee Más

  • Desander - Solids Control - Dachuan Machinery

    Desander is the second equipment in solids control system, it is used to separate the solid phase particles whose diameter is more than 44μm from drilling fluid. The desander produced by DC Machinery is widely used in worldwide, welcome to contact us to get the best solution for your work.

    Lee Más

  • GN economic separation plant for construction machine.

    Nov 16, 2015· Recently, GN shipped several units of desander separation plant for construction machine. The desander machine can be used for bored pile foundation or TBM as well as the horizontal directional drilling projects. Working principle of desander separation plant. 1) we match a same flow rate slurry pump.

    Lee Más

  • Solids Control | Desander Desilter - Part 3

    Apr 20, 2016· Hydrocyclone Desander Desilters are the important solids control equiments for drilling mud, GN Solids Control provide high quality desander desilter for oil gas drilling, CBM Drilling, underground projects desanding plant. Desander and desilter can be mounted on shale shaker to make it as assembly of mud cleaner.

    Lee Más

  • FC Irlande Vets 2 : FC Irlande

    Match report – 12/10/2019 – Nivelles CS 2 – FC Irlande Vets2. On the outskirts of Nivelles, wedged between a military compound and the watchful towers of an industrial plant of sorts, lies a peach of a synthetic pitch, home to Nivelles CS 2, the day’s opponents.

    Lee Más

  • Desander | DC solids control

    Desander is the second equipment in solids control system, it is used to separate the solid phase particles whose diameter is more than 44μm from drilling fluid. The desander produced by DC Machinery is widely used in worldwide, welcome to contact us to get the best solution for your work.

    Lee Más

  • How to match mud agitator in mud tank

    Mud Cleaner from GN Solids Control for drilling mud system, Mud cleaner is a combination of Shale Shaker and Desander Desilter.The drilling mud cleaner is popular used in the oil gas drilling mud cleaning system, horizontal directional drilling mud recycling system, and Mud Cleaner also used for CBM drilling solids control system.

    Lee Más

  • Mini Mud Cleaner for Small Mud System » GN Desander Desilter

    The Structure of Mini Mud Cleaner. GN mini mud cleaner is designed to match desander or desilter cone. For desander cone, we could choose 1 unit or 2 unit 10″ cone. The treating capacity is 500GPM or 1000GPM. Correspondingly, by this capacity, the desilter cone number is 8 and 12. If you want to use it when the flow rate is smaller.

    Lee Más

  • Desilter - Solids Control - Dachuan Machinery

    Desilter produced by DC Machinery can be adjusted to control the handling capacity to match the different requirements. It is widely used in petroleum drilling and HDD (Horizontal directional drilling). 1. Combined by the 4" or 5" hydrocyclones and pipes, the operation and adjustment are much easier. 2.

    Lee Más

  • Solid control equipment and systems

    The whole drilling fluid recycling system tanks and pits can be separated and connected to match the rig drilling work request. The system have 5 phase purification equipment, including shale shaker, vacuum degasser, desander, desilter, centrifuge, etc.

    Lee Más

  • How to match proper centrifuge speed for project

    One Ping to “How to match proper centrifuge speed for project” Easy methods to match correct centrifuge velocity for undertaking | Posts Says: October 29th, 2014 at 11:18 pm […] How to match proper centrifuge speed for project is a submit from: Mud Solids Control Equipment […] Leave a Reply

    Lee Más

  • Piles foundation Desander Unit for sale -- GN Solids ...

    Piles foundation Desander Unit for sale. Piles foundation design can be classified as methods below based on the mechanism of Load Transfer: End/Point Bearing Piles, Friction Piles, Driven or displacement piles, Bored or Replacement piles. - PR12474049

    Lee Más

  • DESILTER-KES Solids Control Equipments

    Desilter is the third phase solids control equipment to handle the drilling fluids. Generally, there are a set of hydrocyclones in 4” or 6” in the desilter, which mainly used for separating the solid particles sized in 15~47μm from the drilling fluids.

    Lee Más

  • China Desilter: Made-in-China Desilter Products & Services

    Let TradeFord.com match your sourcing needs with suitable Desilter suppliers, exporters and manufacturers. Just fill-out an RFQ form and start getting quotations only from suitable suppliers. ... OEE Desander, Desilter, Shale Shaker, Mud Cleaner, Agitator, Hoppers.

    Lee Más

  • - Ennox Technology AS

    Brightway desander has been optimizing processed to match the modern drilling system demands. Desilter. Brightway Desilter was designed by adopting ANSYS limited element analysis and also by supplied from BAOSTEEL, ABB/SIMENS/SCHEIDER or any other company to keep high-level Manufacture standard. ...

    Lee Más

  • CENTRIFUGAL PUMP-KES Solids Control Equipments

    Centrifugal Pump is also called as Sand Pump, Mixing Pump, Feeding Pump, Replenishing Pump and Filling Pump. It is the ideal matching equipment to provide impetus for desander, desilter and Jet mud mixer. Centrifugal pump can also be an assistant mud infusion pump and trip pump at well head.

    Lee Más